If you own a boat, then you have to get on with the summer maintenance schedule because neglecting your boat’s upkeep and care can prove to be costly later on. However, boat summer maintenance isn’t an easy process as you need to have a proper checklist of the tasks you need to perform.
The good news is that – you don’t have to stress much as we’ve got your back covered. In this comprehensive blog post, we will be discussing the primary boat maintenance tips & tricks that you can follow before the winter season arrives.
Tips & Tricks For Summer Boat Maintenance
- Clean Your Boat
According to a professional service provider selling boat parts & accessories, if your boat has been unused all of the winter season, then the first step that you need to take is to remove all its covers and prepare for a deep cleaning process. When you’ll be washing your boat, be sure to remove all the grime that has been collected throughout the winter season, using a simple sponge and a non-abrasive soap.
Once you’ve completed the cleaning process, you can then rinse the surface of the boat and allow it to air dry. Avoid the use of any pressure devices or power washers, as they can damage the structural integrity of your boat.
After your boat’s surface dries up, you have to apply a simple coat of polish, which will help in protecting your boat’s surface from the weathering elements. During this cleaning process, you can also carry out your inspection process, so that if any component needs additional attention, the same will be taken care of, in due time.
- Essential Maintenance Tasks
If your boat has a freshwater system, then this maintenance process will be a great time to flush the system and remove any antifreeze element that has been left behind. Furthermore, you also have to inspect the boat’s sanitation system, to see if they are working as intended.
Once done, you also have to check your boat’s base below the waterline. If needed, you may have to apply a bottom or antifouling paint. Moreover, you also have to inspect the propeller and the zincs (sacrificial anodes). According to a popular service provider selling fishing and boating accessories, it can be possible that all of the above-mentioned areas may need a thorough cleaning, especially since your boat had been sitting in the water throughout the winter months.
After that, you have to check in on the boat’s electrical systems and pay close attention to any light fixtures that have worn out. They might require replacements. Finally, you have to check your first-aid kit and emergency equipment.
For any additional suggestions, send in your feedback or queries. We’d be happy to assist.
