Plasterers can do a wide range of tasks, including skimming different surfaces. Plasterers will need to do additional prep work because the quality and finish of these surfaces may vary.
Plaster can fail if it is applied improperly or if the surface isn’t suitable. It is important to follow the correct steps when skimming over surfaces like artex to achieve a flawless finish.
Although it is possible to skim artex, it is important that you do the proper preparation work. You will want to prime the surface with PVA and smoothen any striations.
After you have completed the preparation work, you can apply plaster to your ceiling or wall. Artex can contain asbestos, so it is important to keep this in mind. You will need to know when artex was applied and when the property was constructed.
Is it easier skimming over or removing artex?
Although Artex can be found in older properties it is not a popular finish. People prefer a smooth surface they can wallpaper or paint. Most people will either want to remove or skim over artex. Both are possible but skimming is the most common.
Although it may seem tempting to remove the artex, it can be time-consuming and costly. You will need a steamer and scraper to remove the artex. Although it is quite simple, it can be very laborious. If the surface is in poor condition, you’ll still need to do this. This basically means you’re doing two jobs, when it is possible to simply skim over the artex.
It is much easier to put a plaster skim coat over artex that is solid and has no broken sections. This will save you time and make it easier to create a smooth surface.
Is there a way to skip artex?
You must do the required preparation work to skim over artex. It will give you a smooth, long-lasting finish with the right preparation.
First, ensure that the surface is in good condition. You should inspect the surface for damage or loose sections. You should not remove any artex that is damaged or loose. Because plaster can crack and eventually fall off the wall, this is why you should not skim over it.
It is important to ensure that the surface is ready for plaster. This will allow the plaster to bond properly to the artex. You will first need to apply two coats PVA to the artex. You will use a mixture of 2:1 (two parts water, one part PVA) to do this.
Before applying the second coat of PVA, you will need to wait for the first coat to dry completely. After the second coat is dry, you can use a scraper to remove any raised areas. This will create a smoother surface and reduce the need for plaster. After this is done, you can apply the first coat.
Is it safe to remove asbestos artex?
It is crucial to determine the date of construction and the application of the artex before you decide to remove it. It could be asbestos if the artex was used on properties built before 1984 or if it was installed before.
You should not attempt to move the artex if you believe it contains asbestos. If you do feel the need to take it out, you can hire a best skim over artex services. The artex is safe to remove if it was not asbestos-free if the property was constructed after 1984.
Asbestos can be very harmful and cause serious health problems if inhaled. It is crucial to have asbestos removed by an expert.
Asbestos experts will use all safety equipment and methods to safely remove it. If you’re looking for a smooth surface that you can decorate, it may be a better idea to just skim. Even if the surface contains asbestos, this is usually the best option.
Conclusion
If the artex is in good condition, you can skim it. This is the fastest and easiest way to create a smooth surface. Before you do any work with artex, make sure you know if it contains asbestos.
If you are sure it does not contain asbestos, you may be able to skim it or plasterboard it. It is important to prepare the job properly in order to achieve a high-quality finish.
