Home

Significance Of Preparing The Exterior Surface Before Performing Exterior Painting

0

If you’re spending hundreds and hundreds of dollars in purchasing high-quality paint in the market, but not planning to prepare the painting well before application – then it’s just a wastage of time, money & effort. 

In case you want your paint job to have the greatest amount of longevity, then you need to spend a substantial amount of time prepping your painting surface. Most of the main failures occur due to a lack of any surface preparation. That’s why we’re here to help you with the same. In this extensive guide, we are going to cover the various ways through which you can effectively prepare your painting surface. 

Methods To Follow When Preparing An Exterior Surface For Painting

  • Clean The Surface

The first tip suggested by a professional exterior painter in Burlington is to clean the surface that you’re planning to paint. There’s no doubt that homes get dirty over time due to the accumulation of dust, dirt, and other contaminants. When you continue to leave these contaminants on the surface, your paint will not stick well with the surface, leading to premature failure.

Therefore, as a pre-painting measure, you need to clean the surface that you’ll be painting. It will make the surface well-prepped-up for the paint to stick on to. 

There are indeed a lot of ways through which you can clean your house’s exterior surfaces, such as hand scrubbing and high-pressure washing.

  • Let The Surface Dry

Once you’ve completed cleaning your surface, you need to wait before the surface gets dried up, so that you can continue with the rest of the painting procedure. You must understand that primer or paint will not stick well to a surface that is damp. 

That’s why, if you want to be on the safe side, let the surface dry up over a couple of days before you start applying the primer. Even if you’re in a rush, you must wait because, at the end of the heyday, you want your paint job to be glorious.

  • Scrape The Surface

This process should only be followed when you’re repainting your property exteriors. In the case of newly constructed properties, this process will not need to be carried out. 

Scraping is done to remove the remaining of the last paint job so that you can have a smooth surface to apply the new one. If you don’t scrape your old paint off the surface, then it can lead to an instant paint failure.

That’s why we suggest using market-bought scrapers for this type of job. They will make your process quick and efficient. 

  • Sand & Prime

Once you’ve completed the scraping procedure, it’s time to sand the surface. It will make the surface smoother than it was before. You can either use an electric sander for this task or use store-bought sandpaper for manual sanding. 

After you’ve completed the sanding process, it’s time to finally apply the primer. Allow the primer to dry for at least some days before applying your favorite paint. And voila, you’re done!

Nancy
At Blogger For Hope you will get smart, reliable and fast solutions to real-life challenges and how they can be implemented, from automobiles to IT, office spaces to medical care we have all it covered up-making every daily life easier.

    How To Successfully Detect Moisture When Inspecting A Home?

    Previous article

    5 Reasons Your Basement is Cold

    Next article

    You may also like

    Comments

    Leave a reply

    Your email address will not be published. Required fields are marked *

    More in Home